TYGH VALLEY ROAD
Carrying TYGH VALLEY ROAD over WHITE RIVER
010 MI EAST OF TYGH VALLY, Wasco, Oregon
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: TYGH VALLEY ROAD
The TYGH VALLEY ROAD bridge in Wasco, Oregon carries TYGH VALLEY ROAD over WHITE RIVER. It was built in 1983, making it 43 years old today. The structure is built primarily of prestressed concrete and spans 1 section, stretching 33.2 meters (109 feet) end to end. Daily traffic averages 1,304 vehicles, placing it in the moderately-trafficked tier of Oregon bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show a deck rating of 7/9, superstructure at 5/9, substructure at 7/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 20.7 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How TYGH VALLEY ROAD compares
Live comparison across Oregon.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1983
- Material
- Prestressed Concrete
- Number of Spans
- 1
- Structure Length
- 33.2 m (109 ft)
- Deck Width
- 12.2 m (40 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 1,304 vehicles/day
- Structure Number
- 00917AB40700152
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗Condition Analysis
- • The deck (driving surface) rates good at 7/9, with no significant deterioration on file.
- • The superstructure (beams and supports above the deck) rates fair at 5/9, minor deterioration that routine maintenance should address.
- • The substructure (piers and abutments) is in good condition (7/9), showing no significant deterioration.
How to read this record
This page shows what the last federal inspection recorded, not whether TYGH VALLEY ROAD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare TYGH VALLEY ROAD against other structures in Wasco and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for TYGH VALLEY ROAD?
TYGH VALLEY ROAD in Wasco, Oregon has a deck rating of 7/9, superstructure rating of 5/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.
How often is TYGH VALLEY ROAD inspected?
TYGH VALLEY ROAD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 1,304 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. TYGH VALLEY ROAD is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for TYGH VALLEY ROAD?
TYGH VALLEY ROAD has an NBI inventory load rating of 20.7 metric tons.
Who is responsible for maintaining TYGH VALLEY ROAD?
TYGH VALLEY ROAD is owned and maintained by County Highway Agency.
How old is TYGH VALLEY ROAD and does age affect safety?
TYGH VALLEY ROAD was built in 1983, making it 43 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.