FHWA NBI 2026 Inspection record Public-domain dataset

KENSINGTON ROAD

Carrying KENSINGTON ROAD over MATTABESSET RIVER

0.2 MI S OF ROUTE 372, Hartford, Connecticut

FHWA NBI inspection record for this structure. Condition ratings, inventory load rating, span, deck width, and average daily traffic refresh annually with each NBI release.

Poor
10 t Inventory load rating

Bridge Snapshot: KENSINGTON ROAD

The KENSINGTON ROAD bridge in Hartford, Connecticut carries KENSINGTON ROAD over MATTABESSET RIVER. It was built in 1958, making it 68 years old today. It was last reconstructed in 1990, extending its service life. The structure is built primarily of steel and spans 5 sections, stretching 19.8 meters (65 feet) end to end. Daily traffic averages 4,200 vehicles, placing it in the moderately-trafficked tier of Connecticut bridges. It is owned and maintained by Town/Township Highway Agency, the entity responsible for routine inspections and any needed repairs.

The latest FHWA inspection records show culvert at 4/9 on the 0–9 NBI scale, where 9 is excellent and 0 is failed. The weakest component sits in poor condition, which drives the overall status of this bridge. Because at least one major component scores 4 or lower, the FHWA classifies this bridge as structurally deficient — a maintenance flag, not a closure order. Its NBI inventory load rating is 10.0 metric tons — the load level the structure is rated to carry at inventory (long-term) level.

In a county that maintains hundreds of NBI-tracked bridges, KENSINGTON ROAD is one data point in a Connecticut inventory that FHWA inspects on a two-year cycle (more often when ratings fall). Bridge age alone is not a reliable safety signal — a 68-era structure can outperform a newer one when maintenance is consistent, materials are sound, and traffic loads stay within design limits. Use the condition ratings above, the sufficiency score, and the structurally-deficient flag together to read the bridge's real status, and check the linked county and state pages to see how this bridge ranks against its peers.

Every figure on this page comes directly from the Federal Highway Administration National Bridge Inventory (NBI), the public dataset that catalogs more than 617,000 highway bridges across the United States and is updated annually from the records that each state Department of Transportation submits to the FHWA. The condition codes use the standardized FHWA Recording and Coding Guide, the same scale that determines federal eligibility for the Highway Bridge Program and the Surface Transportation Block Grant set-aside for off-system bridges. A "structurally deficient" classification under those federal criteria is a maintenance and funding flag, never a closure order; states keep deficient bridges open with load posting, weight limits, or accelerated inspection cycles until rehabilitation or replacement is funded. See our methodology for refresh cadence and the exact NBI release vintage powering each record.

How KENSINGTON ROAD compares

▼ 34.9
Load rating vs Connecticut average (44.9 t)
Bottom 1%
Lower load rating than 99% of Connecticut bridges
893
Bridges in Hartford · 19 structurally deficient
KENSINGTON ROAD 10.0 t
Connecticut average 44.9 t

NBI inventory load rating (metric tons) and structural-deficiency status compared across Connecticut, computed live from the FHWA NBI.

Condition Ratings

Culvert
4/9
Poor (1–4)
Inventory Load Rating
10.0 t
NBI inventory level (metric tons)
SD Status
Structurally Deficient

Ratings are on a 0–9 scale: 9 = Excellent, 7–8 = Good, 5–6 = Fair, 3–4 = Poor, 0–2 = Critical/Failed. Sufficiency rating (0–100) combines structural adequacy, functional obsolescence, and essentiality.

Structural Details

Year Built
1958
Last Reconstructed
1990
Material
Steel
Number of Spans
5
Structure Length
19.8 m (65 ft)
Deck Width
12.3 m (40 ft)
Owner
Town/Township Highway Agency
Avg Daily Traffic
4,200 vehicles/day
Structure Number
03657

Location

0.2 MI S OF ROUTE 372, Hartford, Connecticut
41.631681, -72.768653
View on Google Maps ↗

Data Source

Data from the FHWA National Bridge Inventory (NBI). Bridge inspections are required every two years by federal law. Conditions reflect the most recent inspection.

FHWA NBI Program ↗

Frequently Asked Questions

What do the condition ratings mean for KENSINGTON ROAD?

Bridge condition ratings use a 0–9 scale set by the Federal Highway Administration (FHWA). Ratings 7–9 indicate good condition with no significant problems. Ratings 5–6 mean fair condition with minor issues. Ratings 3–4 indicate poor condition requiring repair. Ratings 0–2 are critical, meaning the bridge has serious structural problems. KENSINGTON ROAD in Hartford, Connecticut.

How often is KENSINGTON ROAD inspected?

Federal law requires most highway bridges to be inspected at least every 24 months. Bridges in poor condition or with known issues may be inspected more frequently (every 12 months or less). KENSINGTON ROAD is part of the National Bridge Inventory maintained by the FHWA. With 4,200 vehicles crossing daily, regular inspection is essential.

What does "structurally deficient" mean for a bridge?

A structurally deficient bridge has at least one major component (deck, superstructure, or substructure) rated 4 or below on the FHWA 0–9 scale. This classification does NOT mean the bridge is unsafe for travel — it means the bridge needs repair, rehabilitation, or eventual replacement. Structurally deficient bridges remain open and are monitored. KENSINGTON ROAD is currently classified as structurally deficient.

What is the inventory load rating for KENSINGTON ROAD?

The NBI inventory rating is the load level a bridge is rated to carry for an indefinite period, recorded in metric tons. A lower number means the structure is more load-restricted. KENSINGTON ROAD has an inventory load rating of 10.0 metric tons. It is distinct from the FHWA sufficiency rating, a separate 0–100 funding-eligibility score that this dataset does not include.

Who is responsible for maintaining KENSINGTON ROAD?

Bridge ownership and maintenance responsibility varies — bridges may be owned by state DOTs, counties, cities, railroads, or federal agencies. KENSINGTON ROAD is maintained by Town/Township Highway Agency. The FHWA oversees the National Bridge Inventory program and sets inspection standards, but day-to-day maintenance falls to the owning agency. If you notice damage or safety concerns, contact your state DOT or call 911 for emergencies.

How old is KENSINGTON ROAD and does age affect safety?

KENSINGTON ROAD was built in 1958, making it 68 years old. Bridge age alone does not determine safety — condition depends on materials, design, traffic load, maintenance history, and environmental exposure. Many older bridges remain in good condition due to regular maintenance and reconstruction. This bridge was last reconstructed in 1990.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A structurally deficient rating does not mean a bridge is closed or unsafe for travel — it indicates the bridge requires repair or replacement. For current closure or safety information, contact your state DOT.

Related

Data sourced from official U.S. government datasets. See our methodology for details. Retrieved and formatted by PlainBridges Editorial