FHWA NBI 2024 Inspection record Public-domain dataset

BELDEN ROAD #2

Carrying BELDEN ROAD #2 over BURLINGTON BROOK

0.9 MILE NORTH OF ROUTE 4, Hartford, Connecticut

Data updated May 2026

FHWA NBI record, refreshed with each annual release.

Fair
38 t Inventory load rating

Bridge Snapshot: BELDEN ROAD #2

The BELDEN ROAD #2 bridge in Hartford, Connecticut carries BELDEN ROAD #2 over BURLINGTON BROOK. It was built in 1956, making it 70 years old today. It was last reconstructed in 2005, extending its service life. The structure is built primarily of prestressed concrete and spans 1 section, stretching 11.3 meters (37 feet) end to end. Daily traffic averages 268 vehicles, placing it in the lower-traffic tier of Connecticut bridges. It is owned and maintained by Town/Township Highway Agency.

The latest FHWA inspection records show a deck rating of 6/9, superstructure at 7/9, substructure at 7/9. The weakest component sits in fair condition. All reported major components score above the Poor range. Its NBI inventory load rating is 38.0 metric tons.

Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.

How BELDEN ROAD #2 compares

▼ 6.9
Load rating vs Connecticut average (44.9 t)
Bottom 46%
Lower load rating than 54% of Connecticut bridges
893
Bridges in Hartford · 19 in Poor condition
BELDEN ROAD #2 38.0 t
Connecticut average 44.9 t

Live comparison across Connecticut.

Historical Sufficiency Rating

PlainBridge-computed
83.3 / 100 - historical 80–100 band
Structural adequacy /55
55.0
Serviceability /30
16.3
Essentiality /15
15.0
Special reductions
−3.0

FHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.

Condition Ratings

Deck
6/9
Fair (5–6)
Superstructure
7/9
Good (7–9)
Substructure
7/9
Good (7–9)
Inventory Load Rating
38.0 t
NBI inventory level (metric tons)
Overall Condition
Fair

Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.

Structural Details

Year Built
1956
Last Reconstructed
2005
Material
Prestressed Concrete
Number of Spans
1
Structure Length
11.3 m (37 ft)
Deck Width
8.1 m (27 ft)
Owner
Town/Township Highway Agency
Avg Daily Traffic
268 vehicles/day
Structure Number
05050

Condition Analysis

  • At 6/9, the deck (driving surface) shows fair condition, with minor wear flagged for upkeep.
  • At 7/9, the superstructure (beams and supports above the deck) is in good shape and shows no significant wear.
  • The substructure (piers and abutments) is in good condition (7/9), showing no significant deterioration.

How to read this record

This page shows what the last federal inspection recorded, not whether BELDEN ROAD #2 is safe to cross today. Here is how to use it.

  • NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
  • Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
  • Compare BELDEN ROAD #2 against other structures in Hartford and across Connecticut. Connecticut bridges
  • Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge

Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.

Frequently Asked Questions

What do the condition ratings mean for BELDEN ROAD #2?

BELDEN ROAD #2 in Hartford, Connecticut has a deck rating of 6/9, superstructure rating of 7/9, and substructure rating of 7/9 on the FHWA's 0–9 scale.

How often is BELDEN ROAD #2 inspected?

BELDEN ROAD #2's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 268 vehicles per day.

What does “structurally deficient” mean in older bridge reports?

FHWA retired that reported status beginning with the 2018 archive. BELDEN ROAD #2 is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.

What is the inventory load rating for BELDEN ROAD #2?

BELDEN ROAD #2 has an NBI inventory load rating of 38.0 metric tons.

Who is responsible for maintaining BELDEN ROAD #2?

BELDEN ROAD #2 is owned and maintained by Town/Township Highway Agency.

How old is BELDEN ROAD #2 and does age affect safety?

BELDEN ROAD #2 was built in 1956, making it 70 years old and last reconstructed in 2005.

Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.

Data sourced from the Federal Highway Administration National Bridge Inventory. See our methodology for details. Retrieved and formatted by PlainBridges

Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.