I140
Carrying I140 over PELLISSIPPI PKWY (I140)
2.5 MI SW JCT SR115&SR333, Blount, Tennessee
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: I140
The I140 bridge in Blount, Tennessee carries I140 over PELLISSIPPI PKWY (I140). It was built in 1990, making it 36 years old today. The structure is built primarily of prestressed concrete continuous. Daily traffic averages 8,159 vehicles, placing it in the moderately-trafficked tier of Tennessee bridges.
The latest FHWA inspection records show limited component ratings on file. The weakest component sits in unrated condition. No reported major component scores in the Poor range under the current federal condition thresholds.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How I140 compares
Live comparison across Tennessee.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1990
- Material
- Prestressed Concrete Continuous
- Avg Daily Traffic
- 8,159 vehicles/day
- Structure Number
- 05I01400003
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether I140 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare I140 against other structures in Blount and across Tennessee. Tennessee bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for I140?
I140 in Blount, Tennessee on the FHWA's 0–9 scale.
How often is I140 inspected?
I140's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 8,159 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. I140 is currently shown as unrated condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for I140?
An inventory load rating is not recorded for I140.
Who is responsible for maintaining I140?
Ownership is not specified for I140 in the NBI.
How old is I140 and does age affect safety?
I140 was built in 1990, making it 36 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.