HWY 292
Carrying HWY 292 over THREE MILE CREEK
011 MI E THE DALLES, Wasco, Oregon
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: HWY 292
The HWY 292 bridge in Wasco, Oregon carries HWY 292 over THREE MILE CREEK. It was built in 2003, making it 23 years old today. The structure is built primarily of steel and spans 1 section, stretching 6.3 meters (21 feet) end to end. Daily traffic averages 5,416 vehicles, placing it in the moderately-trafficked tier of Oregon bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 8/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 69.0 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How HWY 292 compares
Live comparison across Oregon.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2003
- Material
- Steel
- Number of Spans
- 1
- Structure Length
- 6.3 m (21 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 5,416 vehicles/day
- Structure Number
- 19152 292 02020
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether HWY 292 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare HWY 292 against other structures in Wasco and across Oregon. Oregon bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for HWY 292?
HWY 292 in Wasco, Oregon on the FHWA's 0–9 scale.
How often is HWY 292 inspected?
HWY 292's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 5,416 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. HWY 292 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for HWY 292?
HWY 292 has an NBI inventory load rating of 69.0 metric tons.
Who is responsible for maintaining HWY 292?
HWY 292 is owned and maintained by State Highway Agency.
How old is HWY 292 and does age affect safety?
HWY 292 was built in 2003, making it 23 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.