SW 119TH ST.
Carrying SW 119TH ST. over CREEK
0.5 MI E OF MAY AVE, Cleveland, Oklahoma
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: SW 119TH ST.
The SW 119TH ST. bridge in Cleveland, Oklahoma carries SW 119TH ST. over CREEK. It was built in 1979, making it 47 years old today. The structure is built primarily of concrete and spans 3 sections, stretching 12.0 meters (39 feet) end to end. Daily traffic averages 10,900 vehicles, placing it in the heavily-trafficked tier of Oklahoma bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 3/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules. Its NBI inventory load rating is 19.5 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How SW 119TH ST. compares
Live comparison across Oklahoma.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1979
- Material
- Concrete
- Number of Spans
- 3
- Structure Length
- 12.0 m (39 ft)
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 10,900 vehicles/day
- Structure Number
- 195720000000000
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
SW 119TH ST. is in the federal Poor condition category. That is a component-based result, not a closure order.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
- Compare SW 119TH ST. against other structures in Cleveland and across Oklahoma. Oklahoma bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for SW 119TH ST.?
SW 119TH ST. in Cleveland, Oklahoma on the FHWA's 0–9 scale.
How often is SW 119TH ST. inspected?
SW 119TH ST.'s responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 10,900 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. SW 119TH ST. is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for SW 119TH ST.?
SW 119TH ST. has an NBI inventory load rating of 19.5 metric tons.
Who is responsible for maintaining SW 119TH ST.?
SW 119TH ST. is owned and maintained by City/Municipal Highway Agency.
How old is SW 119TH ST. and does age affect safety?
SW 119TH ST. was built in 1979, making it 47 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.