COLBURN CULVER RD
Carrying COLBURN CULVER RD over PACK RIVER
1.0 N. 4.0 E. COLBURN, Bonner, Idaho
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
COLBURN CULVER RD in Bonner, Idaho sits above 11% of rated Idaho bridges on inventory load rating (19 t), while its 1941 build year is earlier than 95% of Bonner's recorded-year cohort (104 bridges).
COLBURN CULVER RD in Bonner, Idaho is rated Poor in the FHWA's 2024 National Bridge Inventory. Built in 1941, it carries 3 rated components on the inspecting agency's 0-9 scale, and its weakest reported component scores 4. The lowest applicable rating sets the federal condition category, so this Poor result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure ID:000000000030235
PRE-1950 · STEEL · SINGLE-SPAN · SUB-LED · LOCAL-ADT · LIGHT-LOAD · CAT-POOR
- PRE-1950 Pre-1950
- STEEL Steel
- SINGLE-SPAN Single span
- SUB-LED Substructure-led
- LOCAL-ADT Local ADT
- LIGHT-LOAD Light load
- CAT-POOR Poor
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: COLBURN CULVER RD
The COLBURN CULVER RD bridge in Bonner, Idaho carries COLBURN CULVER RD over PACK RIVER. It was built in 1941, making it 85 years old today. The structure is built primarily of steel and spans 1 section, stretching 29.3 meters (96 feet) end to end. Daily traffic averages 840 vehicles, placing it in the lower-traffic tier of Idaho bridges. It is owned and maintained by County Highway Agency.
The latest FHWA inspection records show a deck rating of 6/9, superstructure at 6/9, substructure at 4/9. The weakest component sits in poor condition. At least one major component here scores 4 or below, which produces a Poor condition classification under FHWA's current reporting rules.
How COLBURN CULVER RD compares
Age against the county: built in 1941, earlier than 99 of Bonner's 104 bridges with a recorded construction year (95%), against a county median build year of 1976. Age is not a defect on its own, but it is the population from which future Poor ratings are drawn.
Live comparison across Idaho bridges with a recorded inventory load rating (4,574 of 4,616 rated).
COLBURN CULVER RD vs every rated Idaho bridge
Inventory load rating (metric tons), FHWA NBI, this state
19 Top 89% higher than 11% of 4,574 bridges
rated Idaho bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Reported 0–9 component ratings from the FHWA NBI. The highlighted component is the lowest reported input to this record’s current condition category; it is not a closure or live crossing-safety decision.
Bonner inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 104 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 1941
- Material
- Steel
- Number of Spans
- 1
- Structure Length
- 29.3 m (96 ft)
- Deck Width
- 7.3 m (24 ft)
- Owner
- County Highway Agency
- Avg Daily Traffic
- 840 vehicles/day
- Structure Number
- 000000000030235
Condition Analysis
- • The deck (driving surface) rates fair at 6/9, minor deterioration that routine maintenance should address.
- • The superstructure (beams and supports above the deck) is in fair condition (6/9), with minor deterioration that may require routine maintenance.
- • The substructure (piers and abutments) is in poor condition (4/9), showing advanced deterioration on the inspecting agency's 0-9 scale.
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
COLBURN CULVER RD is in the federal Poor condition category. That is a component-based result, not a closure order.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Understand what Poor condition does and does not mean before drawing conclusions. Poor condition explained
- Compare COLBURN CULVER RD against other structures in Bonner and across Idaho. Idaho bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for COLBURN CULVER RD?
COLBURN CULVER RD in Bonner, Idaho has a deck rating of 6/9, superstructure rating of 6/9, and substructure rating of 4/9 on the FHWA's 0–9 scale.
How often is COLBURN CULVER RD inspected?
COLBURN CULVER RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 840 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. COLBURN CULVER RD is currently shown as Poor condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for COLBURN CULVER RD?
COLBURN CULVER RD has an NBI inventory load rating of 19.1 metric tons.
Who is responsible for maintaining COLBURN CULVER RD?
COLBURN CULVER RD is owned and maintained by County Highway Agency.
How old is COLBURN CULVER RD and does age affect safety?
COLBURN CULVER RD was built in 1941, making it 85 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.