KANAB RANCHOS RD
Carrying KANAB RANCHOS RD over KANAB CREEK
SOUTH SIDE OF KANAB, Kane, Utah
Inventory: FHWA NBI 2024 · last ETL August 2026
FHWA NBI record, refreshed with each annual release.
KANAB RANCHOS RD in Kane, Utah sits above 96% of rated Utah bridges on inventory load rating (97 t), while its 2011 build year is earlier than 3% of Kane's recorded-year cohort (29 bridges).
KANAB RANCHOS RD in Kane, Utah is rated Good in the FHWA's 2024 National Bridge Inventory. Built in 2011, it carries 1 rated component on the inspecting agency's 0-9 scale, and its weakest reported component scores 7. The lowest applicable rating sets the federal condition category, so this Good result describes the weakest reported component rather than the structure as a whole. No NBI category is a closure decision or a live crossing-safety verdict.
NBI record plate
Structure UT:025005E
POST-2000 · STEEL · SINGLE-SPAN · CULVERT-LED · LOCAL-ADT · HEAVY-LOAD · CAT-GOOD
- POST-2000 2000+
- STEEL Steel
- SINGLE-SPAN Single span
- CULVERT-LED Culvert-led
- LOCAL-ADT Local ADT
- HEAVY-LOAD Heavy load
- CAT-GOOD Good
Inspection-sheet codes from this record’s year, material family, spans, controlling component, ADT, inventory load, and NBI category, not a live closure verdict.
Bridge Snapshot: KANAB RANCHOS RD
The KANAB RANCHOS RD bridge in Kane, Utah carries KANAB RANCHOS RD over KANAB CREEK. It was built in 2011, making it 15 years old today. The structure is built primarily of steel and spans 1 section, stretching 7.6 meters (25 feet) end to end. Daily traffic averages 600 vehicles, placing it in the lower-traffic tier of Utah bridges. It is owned and maintained by City/Municipal Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. None of this bridge's reported major components fall into the Poor condition range.
How KANAB RANCHOS RD compares
Age against the county: built in 2011, earlier than 1 of Kane's 29 bridges with a recorded construction year (3%), against a county median build year of 1985. This is one of the newer structures in its county.
Live comparison across Utah bridges with a recorded inventory load rating (3,113 of 3,125 rated).
KANAB RANCHOS RD vs every rated Utah bridge
Inventory load rating (metric tons), FHWA NBI, this state
97 Top 4% higher than 96% of 3,113 bridges
rated Utah bridges, bucketed by value
Each bar is a band; taller bars hold more bridges. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count and share, and where it sits relative to this entry.
Source FHWA National Bridge Inventory · August 2026
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Kane inventory by recorded NBI category
Exclusive Good/Fair/Poor bands across all 29 bridges in this county. Orthogonal to this structure's component profile above: a county catalog share, not a live crossing-safety verdict.
Structural Details
- Year Built
- 2011
- Material
- Steel
- Number of Spans
- 1
- Structure Length
- 7.6 m (25 ft) 0
- Owner
- City/Municipal Highway Agency
- Avg Daily Traffic
- 600 vehicles/day
- Structure Number
- 025005E
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether KANAB RANCHOS RD is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare KANAB RANCHOS RD against other structures in Kane and across Utah. Utah bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for KANAB RANCHOS RD?
KANAB RANCHOS RD in Kane, Utah on the FHWA's 0–9 scale.
How often is KANAB RANCHOS RD inspected?
KANAB RANCHOS RD's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 600 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. KANAB RANCHOS RD is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for KANAB RANCHOS RD?
KANAB RANCHOS RD has an NBI inventory load rating of 96.6 metric tons.
Who is responsible for maintaining KANAB RANCHOS RD?
KANAB RANCHOS RD is owned and maintained by City/Municipal Highway Agency.
How old is KANAB RANCHOS RD and does age affect safety?
KANAB RANCHOS RD was built in 2011, making it 15 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Share this inspection record
Send this source-bounded record or download its data card. An NBI condition category is not a closure or live crossing-safety verdict.
Every figure on PlainBridges is rendered directly from federal source data, no number is typed in by an editor. Component ratings, ADT, and condition category on this page are copied from the NBI record for this structure; no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2024 NBI release. NBI condition categories reflect the latest reported inventory record, not a live safety, closure, or travel decision.