FAP 20
Carrying FAP 20 over BRANCH
3.3 MI SE JCT SR20&SR210, Dyer, Tennessee
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: FAP 20
The FAP 20 bridge in Dyer, Tennessee carries FAP 20 over BRANCH. It was built in 1996, making it 30 years old today. The structure is built primarily of concrete continuous and spans 2 sections, stretching 9.4 meters (31 feet) end to end. Daily traffic averages 10,787 vehicles, placing it in the heavily-trafficked tier of Tennessee bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 6/9. The weakest component sits in fair condition. None of this bridge's reported major components fall into the Poor condition range. Its NBI inventory load rating is 32.4 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How FAP 20 compares
Live comparison across Tennessee.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 1996
- Material
- Concrete Continuous
- Number of Spans
- 2
- Structure Length
- 9.4 m (31 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 10,787 vehicles/day
- Structure Number
- 23SR0200041
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether FAP 20 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare FAP 20 against other structures in Dyer and across Tennessee. Tennessee bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for FAP 20?
FAP 20 in Dyer, Tennessee on the FHWA's 0–9 scale.
How often is FAP 20 inspected?
FAP 20's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 10,787 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. FAP 20 is currently shown as Fair condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for FAP 20?
FAP 20 has an NBI inventory load rating of 32.4 metric tons.
Who is responsible for maintaining FAP 20?
FAP 20 is owned and maintained by State Highway Agency.
How old is FAP 20 and does age affect safety?
FAP 20 was built in 1996, making it 30 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.