FAP 55
Carrying FAP 55 over BRANCH
1.24 MI NE OF LYNCHBURG, Moore, Tennessee
Data updated May 2026
FHWA NBI record, refreshed with each annual release.
Bridge Snapshot: FAP 55
The FAP 55 bridge in Moore, Tennessee carries FAP 55 over BRANCH. It was built in 2008, making it 18 years old today. The structure is built primarily of concrete continuous and spans 2 sections, stretching 11.6 meters (38 feet) end to end. Daily traffic averages 6,878 vehicles, placing it in the moderately-trafficked tier of Tennessee bridges. It is owned and maintained by State Highway Agency.
The latest FHWA inspection records show culvert at 7/9. The weakest component sits in good condition. All reported major components score above the Poor range. Its NBI inventory load rating is 32.4 metric tons.
Sourced from the FHWA National Bridge Inventory. See our methodology for refresh cadence and NBI release vintage.
How FAP 55 compares
Live comparison across Tennessee.
Historical Sufficiency Rating
PlainBridge-computedFHWA discontinued this calculated item; it does not determine current condition, funding eligibility, posting, or closure. How the historical reference is calculated.
Condition Ratings
Full 0–9 scale + sufficiency-rating breakdown: how condition ratings work.
Structural Details
- Year Built
- 2008
- Material
- Concrete Continuous
- Number of Spans
- 2
- Structure Length
- 11.6 m (38 ft)
- Deck Width
- 16.8 m (55 ft)
- Owner
- State Highway Agency
- Avg Daily Traffic
- 6,878 vehicles/day
- Structure Number
- 64SR0550011
Location
Data Source
FHWA National Bridge Inventory (NBI).
FHWA NBI Program ↗How to read this record
This page shows what the last federal inspection recorded, not whether FAP 55 is safe to cross today. Here is how to use it.
- NBI condition ratings reflect the latest record in this annual dataset, not a live status. Current routine inspection intervals are risk-based.
- Learn how the 0–9 condition scale and Good/Fair/Poor categories are defined. How condition ratings work
- Compare FAP 55 against other structures in Moore and across Tennessee. Tennessee bridges
- Noticed visible damage or a safety concern? Report it to the agency that owns the bridge, or call 911 in an emergency. How to report a bridge
Condition codes come straight from the FHWA National Bridge Inventory and are not a real-time safety judgment. Only the owning agency, a state DOT, county, or other owner, can post, restrict, or close a bridge.
Frequently Asked Questions
What do the condition ratings mean for FAP 55?
FAP 55 in Moore, Tennessee on the FHWA's 0–9 scale.
How often is FAP 55 inspected?
FAP 55's responsible agency sets its routine interval under FHWA's risk-based inspection rules; this page does not expose the scheduled interval. It carries about 6,878 vehicles per day.
What does “structurally deficient” mean in older bridge reports?
FHWA retired that reported status beginning with the 2018 archive. FAP 55 is currently shown as Good condition from its component ratings; that category is not a live closure or safety decision.
What is the inventory load rating for FAP 55?
FAP 55 has an NBI inventory load rating of 32.4 metric tons.
Who is responsible for maintaining FAP 55?
FAP 55 is owned and maintained by State Highway Agency.
How old is FAP 55 and does age affect safety?
FAP 55 was built in 2008, making it 18 years old.
Disclaimer: Bridge condition data is from the FHWA NBI and reflects the last reported inspection. A Poor condition rating is not a live declaration that a bridge is closed or unsafe for travel. For current closure, posting, or safety information, contact the responsible transportation agency.
Every figure on PlainBridge is rendered directly from federal source data, no number is typed in by an editor. This page draws directly on federal source data, no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error.